Triple Claw Blind Rivets

Filter

TRIPLE CLAW BLIND RIVETS (LIGHT WEIGHT CONSTRUCTION) TRI-GO

Applications

  • plastic materials
  • plasterboard
  • joining wood

and many others

Characteristics

  • the rivet body splits up into 3 parts
  • especially suitable for soft or brittle material
  • fits even great hole tolerances at the riveting side
  • suitable for light connections
  • variable grip length

Head shape

Domed head

MATERIALS

Al = Alu

ST= Steel zinc plated

Available in the following qualities

TRIPLE CLAW BLIND RIVETS (CONSTRUCTION) TRE-GO

Applications

  • building industry
  • fastening of roofing sheets and cladding panels
  • steel engineering

and many others

Characteristics

  • The remaining mandrel is locked mechanically
  • Splash-proof with the appropriate drilling
  • an additional neoprene washer under the setting head prevents water from penetrating the riveting point
  • large, flap-shaped closing head support
  • strong clamping effect

Head shape

Domed head

MATERIALS

Al = Alu

Available in the following qualities

TECHNICAL EXPLANATIONS

Grip range of the rivet.
The named shearing strength (N = Newton) in this catalogue are minimum values, determined according to test method ISO 14589 (2000), which the rivet meets on average in a defined test series.
The named tensile strength (N = Newton) in this catalogue are minimum values, determined according to test method ISO 14589 (2000), which the rivet meets on average in a defined test series.
(1 kp ≈ 10 N )

TECHNICS

Length (L)

Nominal Diameter (D1)

Head Diameter (D2)

Head Height (k)

Mandrel Diameter (d)

Mandrel Length (P)

If you are searching for a quality, a material combination or a measurement which is not listed in the catalogue, please don’t hesitate to contact us.

Alternatively we got the possiblity to develop a blind rivet type especially for your application. For Example:

  • softer breaking point 1
  • displaced breaking point 2
  • grooved mandrel 3
  • longer mandrel 4

etc.

TESTS ACCORDING ISO 14589

This inspection ISO 14589 includes the following points.

The tests consist of straining a blind rivet which is set in a test fixture by a shear load or tensile load to failure.

The test consists of loading the mandrel axially from the head side of a blind rivet untill it is pushed out.

The test consists of straining the mandrel removed from the rivet body in a test fixture by a tensile load to fracture.

The test consists of loading the mandrel axially, from the head side of a set blind rivet up to the head retention load. All details in Newton, 1kp = 9,80665 N (10N)

For every delivered batch GOEBEL is able to handout the inspection report. With this procedure it is guaranteed that only tested items will be delivered for a customers safe treatment.

Shearing test

Tensile test

Mandrel push out test

Mandrel breaking test

Mandrel retaining test

Shopping cart
Contact
Last seen